Change a Propane Tank
Forklifts fueled by propane are common in warehouse settings. These forklifts have a propane mount situated at the back of the operator. These tanks need to be replaced every so often as they have limited lifespans. Drivers of forklifts must utilize care when handling propane tanks. Compressed gases are really hazardous, particularly because the gas is flammable. Utilize caution when replacing and removing propane tank to prevent being injured.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn off the tank valve. The lift truck should be left on until the engine dies. This process burns off the gas in the transfer hose which connects the tank and the engine. Prior to taking the second steps, wear the proper safety equipment, like for instance insulated gloves made of either leather or neoprene. It is very important for you to protect your skin from touching the compressed gas, that is very cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, tighten the nut to reconnect the holding straps and to reconnect the hose at the valve of the tank.
3 Leaks can be inspected simply by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to froth from around the valve. If this occurs, inspect the valve area and the connection hose at the nut. The connecting nut must be re-tightened if you detect any leaks in the valve area, and afterward perform the leak checking process once more. Persistent leaks mean that the nut and connecting hose should be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank will need to be replaced.
4 Lastly, open the valve all the way to allow the gas to fill the connecting hose. After that you can start the lift truck and continue operating.